| CODE AND STANDARD FOR PIPING ENGINEER |
| STANDARD |
TITLE DETAILS |
| |
|
| ASME |
AMERICAN SOCIETY OF MECHANICAL ENGINEERS |
| ASME B1.1 |
Unified Inch Screw Threads (UN and UNR Thread Form) |
| ASME B1.20.1 |
Pipe Threads, General Purpose (Inch) |
| ASME B16.1 |
Cast Iron Pipe Flanges and Flanged Fittings |
| ASME B16.10 |
Face-to face and End to End Dimensions of Valves |
| ASME B16.11 |
Forged Fittings, Socket-Weldinmg and Threaded |
| ASME B16.14 |
Ferruos Pipe Plugs, Bushings, and Locknuts with Pipe Threads |
| ASME B16.15 |
Cast Bronze Threaded Fittings |
| ASME B16.20 |
Metallic Gaskets for Pipe Flanges - Ring-Joint, Spiral-Wound, and Jacketed |
| ASME B16.21 |
Nonmetallic Flat Gaskets for Pipe Flanges |
| ASME B16.24 |
Cast Copper Alloy Pipe Flanges and Flanged Fittings |
| ASME B16.25 |
Buttwelding Ends |
| ASME B16.28 |
Wrought Steel Buttwelding Short Radius Elbows and Returns |
| ASME B16.34 |
Valve -Flanged, Threaded and Welding End |
| ASME B16.36 |
Orifice Flanges |
| ASME B16.39 |
Malleable Iron Threaded Pipe Unions |
| ASME B16.4 |
Gray iron Threaded Fittings |
| ASME B16.42 |
Ductile Iron Pipe Flanges and Flanged Fittings |
| ASME B16.47 |
Large Diameter Steel Flanges |
| ASME B16.48 |
Steel Line Blanks |
| ASME B16.49 |
Factory Made Wrought Steel Butuwelding Induction Bends for Transportation & Distribution System |
| ASME B16.5 |
Pipe Flanges and Flanged Fittings |
| ASME B16.9 |
Factory-Made Wrought Steel Buttwelding Fittings |
| ASME B18.2.1 |
Square and Hex. Bolts and Screws, Inch Series |
| ASME B18.2.2 |
Square and Hex. Nuts |
| ASME B18.21 |
Square and Hex Bolts and Screws Inch Series |
| ASME B18.22 |
Square and Hex Nuts (Inch Series) |
| ASME B31.1 |
Power Piping |
| ASME B31.3 |
Process Piping |
| ASME B31.4 |
Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids |
| ASME B31.8 |
Gas Transmission Distribution and Piping Systems |
| ASME B36.10 |
Welded and Seamless Wrought Steel Pipe |
| ASME B36.10M |
Welded and Seamless Wrought Stell Pipe |
| ASME B36.19 |
Stainless Steel Pipe |
| ASME B36.19M |
Stainless Steel Pipe |
| ASME B46.1 |
Surface Texture (Surface Roughness, Waviness, and Lay) |
| |
|
| ASTM |
AMERICAN SOCIETY OF TESTING AND MATERIALS |
| ASTM VOL 00.01 |
Index |
| ASTM VOL 01.01 |
Steel - Piping, Tubing, Fittings |
| ASTM VOL 01.02 |
Ferrous Castings; Ferro alloy |
| ASTM VOL 01.03 |
Steel - Plates, Sheet, Strip, Wire; Stainless Steel bar |
| ASTM VOL 01.04 |
Steel - Structural Reinforcing, Pressure Vessels, Railways |
| ASTM VOL 01.05 |
Steel - Bars, Forgings, Bearing, Chains, Springs |
| ASTM VOL 01.06 |
Steel - Coated Steel Products |
| ASTM VOL 01.07 |
Ship & Marine Technology |
| ASTM VOL 02.04 |
Nonferroues Metals - Nickel, Cobalt, Lead, Tin, Zinc, Cadmium |
| ASTM VOL 03.01 |
Metal - Mechanical Testing; Elevated & Low Temperatures |
| |
|
| API |
AMERICAN PETROLEUM INSTITUTE |
| API 2510 |
Caltex General Engineering Specification GPS-S2 |
| API 521 |
Guide for Pressure-Relieving and Depressuring Systems |
| API 590 |
Steel Line Blanks |
| API 594 |
Check Valves : Flanged, Lug, Wafer and Butt-Welding |
API 595
(Abortion) |
Cast-Iron Gate Valves, Flanged Ends |
| API 598 |
Valve Inspection and Testing |
| API 599 |
Metal Plug Valves - Flanged and Welding Ends |
| API 5L |
Specification for Line Pipe |
| API 600 |
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries |
| API 602 |
Compact Steel Gate Valves - Flanged, Treaded, Welding, and Extended-Body Ends |
| API 603 |
Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves |
| API 606 |
Comppact Steel Gate Valves - Extended Body |
| API 607 |
Testing of Valves - Fire Type-testing Requirements |
| API 608 |
Metal Ball Valves - Flanged, Treaded, and Welding End |
| API 609 |
Butterfly Valves, Lug - Type and Wafer - Type |
| API 610 |
Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services |
| API 611 |
General-Purpose Steam Turbines for Refinery Service |
| API 617 |
Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries |
| API 618 |
Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services |
| API 661 |
Air - Cooled Heat Exchangers for General Refinery Service |
| API 6A |
Specification for Wellhead and Chirstmas Tree Equipment |
| API 6D |
Pipeline Valves (Steel Gate, Plug, Ball and Check Valves) |
| API 6FA |
Specification Fire Test for Valves |
| API 941 |
Steels for Hydrogen Service at Elevated Temperatures and Pressures
in Petroleum Refineries & Petrochemical Plants |
| API RP 14E |
Recommended Practise for Design and Installation of Offshore Production Platform Piping System |
| API RP 17A |
Recommended Practise for Design and Operation of Subsea Production System |
| API RP 17D |
Specification for subsea Wellhead and Christmas Tree Equipment |
| API RP 55 |
Recommended Practise for Oil & Gas Producing and Gas Processing Plant Operations Involving Hydrogen Sulfide. |
| API RP2A-LRFD |
Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Load and Resistance Factor Design |
| API RP2A-WSD |
Planning, Designing & Construction Fixed Offshore Platform - Working Stress Design |
| |
|
| BS |
BRITISH STANDARD |
| BS 1868 |
Specification for Steel Check Valves (flanged and butt-welding) for the Petroleum, Petrochemical and Allied Industries |
| BS 1873 |
Specification for Steel Globe and Globe Stop and Check Valves (flanged and butt-welding) for the Petroleum, Petrochemical and Allied Industries |
| BS 2080 |
Face to face, centre to centre , end to end and centre to end dimensions of valves |
| BS 2871 |
Part 2 - Copper and Copper Alloys |
| BS 3974 |
Part 1 - Specification for Pipe Supports - Pipe Hangers, Slider and Roller Types Supports |
| BS 3974 |
Part 2 - Specification for Pipe Supports - Pipe Clamps, Cages, Cantilivers, and Attachment to Beams |
| BS 3974 |
Part 3 - Specification for Pipe Supports - Large Bore, High Temperature, Marine and Other Applications |
| BS EN 1092-1 (2002) |
Specification for Flanges and Boldtings for Pipes, Valves and Fittings |
| ISO 17292 (2004) |
Steel Ball Valves for the Petroleum, Petrochemical and Allied Industries |
| ISO 15761 (2002) |
Specification for Steel Wedge Gate, Globe and Check Valves 50mm and smaller for the Petroleum, Petrochemical and Allied Industries. |
| BS EN 12266-1 (2003) and BS EN 12266-2 (2002) |
Part 1 - Specification for Production Pressure Testing Requirements |
| BS EN ISO 10497 (2004) |
Part 2 - Specification for Fire Testing Requirements |
| BS EN 10204 |
Metallic Products - Types of Inspection Documents |
| |
|
| NACE |
NATIONAL ASSOCIATION OF CORROSION ENGINEERS |
| NACE MR0175/ISO 15156 |
Materials for use in H2S - containing environments in oil and gas production |
| NACE MR0103 |
Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments |
| NACE TM0177 |
Laboratory Testing of Materials of Resistance to Sulphine Stress Cracking in H2S Environment |
| NACE TM0284 |
Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen Induced Cracking |
| |
|
| EEMUA |
THE ENGINEERING EQUIPMENT AND MATERIAL USERS ASSOCIATION |
| EEMUA |
Speficifaction Tubes Seamless and Welded |
| EEMUA |
Speficifaction for Flanges Composite and Solid |
| EEMUA |
Specification for Fittings |
| |
|
| MSS |
MANUFACTURERS STANDARDIZATION SOCIETY |
| MSS SP 6 |
Standard finishes for Contact Faces of Pipe, Flanges and Connecting - End Flanges of Valves and Fittings |
| MSS SP-101 |
Part-Turn Valve Actuator Attachment
Flange and Driving Component Dimensions and Performance Characteristics |
| MSS SP-102 |
Multi-Turn Valve Actuator Attachment
Flange and Driving Component Dimensions and Performance Characteristics |
| MSS SP-106 |
Cast Copper Alloy Flanges Class 125, 150, and 300 |
| MSS SP-107 |
Transition Union Fittings for Joining Metal and Plastic Products |
| MSS SP-108 |
Resilient-Seated Cast Iron-Eccentric Plug Valves |
| MSS SP-25 |
Standard Marking System for Valves, Fittings, Flanges and Unions |
| MSS SP-42 |
Class 150 Corrosion Resistant Gate, Globe, Angle and Check Valves with Flanged and Butt Weld Ends |
| MSS SP-43 |
Wrought Stainless Steel Butt-Welding Fittings |
| MSS SP-44 |
Steel Pipeline Flanges |
| MSS SP-45 |
Bypass and Drain Connections |
| MSS SP-51 |
Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings |
| MSS SP-53 |
Quality Standard for Steel Castings and Forgings
for Valves, Flanges and Fittings and Other Piping Components |
| MSS SP-54 |
Quality Standard for Steel Castings
for Valves, Flanges and Fittings and other Piping Components |
| MSS SP-58 |
Pipe Hangers and Supports - Materials, Design and Manufacture |
| MSS SP-61 |
Pressure Testing of Steel Valves |
| MSS SP-65 |
High Pressure Chemical Industry Flanges and Threaded Stubs for use with Lens Gaskets |
| MSS SP-67 |
Butterfly valves |
| MSS SP-67 |
Butterfly Valves |
| MSS SP-68 |
High Pressure Butterfly Valves with Offset Design |
| MSS SP-69 |
Pipe Hangers and Supports - Selection and Application |
| MSS SP-69 |
Pipe Hangers and Supports - Selection and Application |
| MSS SP-70 |
Cast-iron Gate Valves Flanged and Threaded Ends |
| MSS SP-71 |
Cast-iron Swing Check Valves, Flanged and Threaded Ends |
| MSS SP-72 |
Ball Valves with Flanged or Butt-Welding Ends for General Service |
| MSS SP-75 |
Specification for High-Test, Wrought, Butt-Welding Fittings |
| MSS SP-77 |
Guidelines for Pipe Support Contractual Relationships |
| MSS SP-78 |
Cast Iron Plug Valves, Flanged and Threaded Ends |
| MSS SP-79 |
Socket-Welding Reducer Inserts |
| MSS SP-80 |
Bronze Gate, Globe, Angle and Check Valves |
| MSS SP-81 |
Stainless Steel, Bonnetless, Flanged Knife Gate Valves |
| MSS SP-82 |
Valve Pressure Testing Methods |
| MSS SP-83 |
Class 3000 Steel Pipe Unions, Socket-Welding and Threaded |
| MSS SP-84 |
Valves - Socket Welding and Threaded Ends |
| MSS SP-85 |
Cast Iron Globe & Angle Valves Flanged and Threaded Ends |
| MSS SP-86 |
Guidelines for Metric Data in Standards for Valves, Flanges, Fittings and Actuators |
| MSS SP-88 |
Diagram Type Valves |
| MSS SP-89 |
Pipe Hangers and Supports - Fabrication and Installation Practices |
| MSS SP-9 |
Spot facing for Bronze, Iron and Steel Flanges |
| MSS SP-90 |
Guidelines on Terminology for Pipe Hangers and Supports |
| MSS SP-91 |
Guidelines for Manual Operation of Valves |
| MSS SP-92 |
MSS Valve User Guide |
| MSS SP-93 |
Quality Standard for Steel Castings and Forgings
for Valves, Flanges and Fittings and Other Piping Components |
| MSS SP-94 |
Quality Standard for Ferritic and Martensistic Steel Castings for Valves, Flanges,
and Fittings and Other Piping Components Ultrasonic Examination Method |
| MSS SP-95 |
Swage(d) Nipples and Bull Plugs |
| MSS SP-96 |
Guideline on Terminology for Valve and Fittings |
| MSS SP-97 |
Integrally Reinforced Forged Branch Outlet Fittings Socket Welding, Threaded and But Welding Ends |
| MSS SP-98 |
Protective Coatings, for the Interior of Valves, Hydrants, and Fittings |
| |
|
| WRC |
WELDING RESEARCH COUNCIL |
| WRC 350 |
Design Criteria For Dissimilar Metal Weds |
| WRC 368 |
Stresses in Interconnecting Cylinders subjected to Pressure |
| WRC 392 |
Developing Stress Intensification Factors |
| WRC 417 |
Design Guide to Reduce Potential For Vibration Caused By Fluid Flow Inside Pipes-Review and Survey |
| WRC 425 |
A Review of Methods For The Analysis Of Buried Pressure Piping |
| WRC 492 |
Piping System SIFs and Flexibility Analysis Criteria |
| |
|
| IRI |
INDUSTRIAL RISK INSURERS |
| IM 2.5.2 |
Oil and Chemical Plant Lay-out and spacing |
| IM 2.5.2A |
Hazard classification of Process operations for Spacing Requirement |
| |
|
| NFPA |
NATIONAL FIRE PROTECTION ASSOCIATION |
| NFPA 30 |
Flammable and Combstible liquids code |
| |
|
| |
|
